Forum › MIFARE general topics and applications › Mifare 1k-Read/write block fail using keyB › Reply To: Mifare 1k-Read/write block fail using keyB
Thank you so much for your reply.I got both key A and key B working with PN512 reader.
Now i got another issue which is i'm using clrc66303 reader to read the cards.The reader authenticates the card when key A is used but the same reader fails to authenticate when key B is used.Should i need to change any settings in card / reader to make key B work.
The access condition settings for Data block-000 and sector trailer-011(key B-never read).
Kindly clarify me whether the clrc663 will work with key B or not.And it would be very much helpful for me ,if this issue was resolved.
Now i got another issue which is i'm using clrc66303 reader to read the cards.The reader authenticates the card when key A is used but the same reader fails to authenticate when key B is used.Should i need to change any settings in card / reader to make key B work.
The access condition settings for Data block-000 and sector trailer-011(key B-never read).
Kindly clarify me whether the clrc663 will work with key B or not.And it would be very much helpful for me ,if this issue was resolved.
+ 0
|
- 0