Forum › MIFARE general topics and applications › Mifare 1k-Read/write block fail using keyB › Reply To: Mifare 1k-Read/write block fail using keyB
Hi Shobana,
Please take in mind, also the access permission bits are required! In the default settings, you can use both keys for reading. But there exists some setting where you can read with one and write with the other key.
I recommend having a look to this older post:
Access bit do not function properly, or I do not understand them :)
The TapLinx team
Please take in mind, also the access permission bits are required! In the default settings, you can use both keys for reading. But there exists some setting where you can read with one and write with the other key.
I recommend having a look to this older post:
Access bit do not function properly, or I do not understand them :)
The TapLinx team
+ 0
|
- 0