Forum › MIFARE SmartCard IC`s › Sam Av2 Lock/Unlock command problem › Reply To: Sam Av2 Lock/Unlock command problem
Hi Marcelo,
You use the LockUnlock command to switch into AV2 mode. If the SAM has switched, you get “key is already locked/unlocked”. You do not need to call it again.
The TapLinx team
You use the LockUnlock command to switch into AV2 mode. If the SAM has switched, you get “key is already locked/unlocked”. You do not need to call it again.
The TapLinx team
+ 0
|
- 0