Reply To: Read Mifare Classic Sector from windows 8.1 industry pro

Forum MIFARE SDK Read Mifare Classic Sector from windows 8.1 industry pro Reply To: Read Mifare Classic Sector from windows 8.1 industry pro

Re: Read Mifare Classic Sector from windows 8.1 industry pro

26. September 2018 at 10:20
Hi Carlos,

Please take in mind: the MIFARE Classic uses a cipher which is implemented in hardware and must be supported in the NFC reader chip. Not all NFC products support the Classic. Unfortunately, you cannot check this feature by software.

You should start your development with a device where you definitely know the Classic is supported.

The TapLinx team

+ 0  |  - 0