Forum › MIFARE general topics and applications › Desfire ev1 get application ID › Reply To: Desfire ev1 get application ID
Hi Alain,
The card issuer can block the reading of all AIDs for everyone. If you deal with a specific AID you can always use the command SelectApplication(). If the AID exists, the command returns successfully. Otherwise you get an error.
The TapLinx team
The card issuer can block the reading of all AIDs for everyone. If you deal with a specific AID you can always use the command SelectApplication(). If the AID exists, the command returns successfully. Otherwise you get an error.
The TapLinx team
+ 0
|
- 0