Forum › MIFARE SDK › Native commands sending to MiFARE DESFire EV1 › Reply To: Native commands sending to MiFARE DESFire EV1
Hi Neel,
“Native commands” are a command set for the MIFARE DESFire. The DESFire also accept the “ISO 7416 command set”. If you can communicate with the card, then you can send native commands or ISO commands to the card. There is no “special software” needed.
The TapLinx team
“Native commands” are a command set for the MIFARE DESFire. The DESFire also accept the “ISO 7416 command set”. If you can communicate with the card, then you can send native commands or ISO commands to the card. There is no “special software” needed.
The TapLinx team
+ 0
|
- 1