Forum › MIFARE SmartCard IC`s › MIFARE DESFire › DESFire EV2 ChangeFileSettings 0x1E error › Reply To: DESFire EV2 ChangeFileSettings 0x1E error
Resolved!
To execute this command on an EV2 it is necessary use the AuthenticateEV2First command for authentication.
It is also required to use the EV2 full encryption mode (EV1 mode is not compatible).
To execute this command on an EV2 it is necessary use the AuthenticateEV2First command for authentication.
It is also required to use the EV2 full encryption mode (EV1 mode is not compatible).
+ 1
|
- 0