Forum › MIFARE and NFC Reader IC`s › Mifare Plus X switch from SL1 to SL3 › Reply To: Mifare Plus X switch from SL1 to SL3
Hi Kevin,
“Layer 4 communication” is an option and you must set this option in SL0->SL1 and SL1->SL3. In SL0 you must do a write perso AND commit perso! In SL1 you make a “first authenticate” to block 9003 with the appropriate key. Do not forget to set also “Layer 4 communication”.
The TapLinx team
“Layer 4 communication” is an option and you must set this option in SL0->SL1 and SL1->SL3. In SL0 you must do a write perso AND commit perso! In SL1 you make a “first authenticate” to block 9003 with the appropriate key. Do not forget to set also “Layer 4 communication”.
The TapLinx team
+ 0
|
- 0