Forum › MIFARE SDK › Ultralight C authentication with Taplinx › Reply To: Ultralight C authentication with Taplinx
Hi Parashu,
I checked the sample from above and it works. But I see that you changed the key values from byte array KEY_2KTDES_ULC. This is the default key you must use for the first time!
Regards,
The TapLinx team
I checked the sample from above and it works. But I see that you changed the key values from byte array KEY_2KTDES_ULC. This is the default key you must use for the first time!
Regards,
The TapLinx team
+ 0
|
- 0