Forum › MIFARE general topics and applications › CLRD710 (Pegoda) beeping in X mode › Reply To: CLRD710 (Pegoda) beeping in X mode
Hi Willem,
No, the printed circuit is not fixed with screws. The LEDs are pressed into the rear side of the cover plate and the connection is very short. Therefore you cannot open and remove the cover and have to use the screw driver to remove printed circuit carefully. Any other tool with a long handle is as good as well.
The TapLinx team
No, the printed circuit is not fixed with screws. The LEDs are pressed into the rear side of the cover plate and the connection is very short. Therefore you cannot open and remove the cover and have to use the screw driver to remove printed circuit carefully. Any other tool with a long handle is as good as well.
The TapLinx team
+ 0
|
- 0