Forum › MIFARE general topics and applications › How to read MIFARE DesFire EV1 iwth ISO ADPU/PCSC? › Reply To: How to read MIFARE DesFire EV1 iwth ISO ADPU/PCSC?
Hi Markus,
ISO7816 is an industry standard and you will find a lot documents, if you try to google. You find in the public datasheet (link in previous post) which commands are supported by the MIFARE DESFire EV1. How the commands are used, you will find it in the ISO specs and documents. Take “ISO 7816-4: Interindustry Commands for Interchange” as key words.
You should know, the MIFARE DESFire EV1 also accepts so called “native commands”. But the datasheet for native commands is NDA classified. For getting a NDA, we need the legal address of a company or a university. So, hobby enthusiasts cannot get a NDA from NXP, sorry.
The TapLinx team
ISO7816 is an industry standard and you will find a lot documents, if you try to google. You find in the public datasheet (link in previous post) which commands are supported by the MIFARE DESFire EV1. How the commands are used, you will find it in the ISO specs and documents. Take “ISO 7816-4: Interindustry Commands for Interchange” as key words.
You should know, the MIFARE DESFire EV1 also accepts so called “native commands”. But the datasheet for native commands is NDA classified. For getting a NDA, we need the legal address of a company or a university. So, hobby enthusiasts cannot get a NDA from NXP, sorry.
The TapLinx team
+ 0
|
- 0