Forum › MIFARE SDK › New to mifare and the samples aren't working for me › Reply To: New to mifare and the samples aren't working for me
Hello Paul,
It seems that this library “onovotny/MiFare” only supports MIFARE Classic. I cannot say anything about this library, it is not maintained by NXP.
If you want to use to authenticate, read and write to a Classic, it could be much easier to use PC/SC which is an official interface in Windows. Here it is important to read the manual of the used NFC reader, because the APDU commands usually wrapped into other commands. This wrapping depends on implementation of the manufacturer of the reader.
At the end there are only a couple of commands you have to implement in your software. So a library might not be necessary in this case.
The Taplinx team
It seems that this library “onovotny/MiFare” only supports MIFARE Classic. I cannot say anything about this library, it is not maintained by NXP.
If you want to use to authenticate, read and write to a Classic, it could be much easier to use PC/SC which is an official interface in Windows. Here it is important to read the manual of the used NFC reader, because the APDU commands usually wrapped into other commands. This wrapping depends on implementation of the manufacturer of the reader.
At the end there are only a couple of commands you have to implement in your software. So a library might not be necessary in this case.
The Taplinx team
+ 0
|
- 0