Forum › MIFARE general topics and applications › Mifare Dual Interface › Reply To: Mifare Dual Interface
Hello Onyekachi,
Some JCOP cards support MIFARE in the way that parts of the MIFARE hardware are also present on the JCOP die. There must be a special applet available to activate the MIFARE part on the JCOP card. This was released as MIFARE4Mobile version 1.0.1. But nowadays version 1.0.1 is obsolete and replaced with version 2.1.1.
The link from my previous post is a good advice, because here you get information about the suitable JCOP solution and you can get samples.
Regards,
The TapLinx team
Some JCOP cards support MIFARE in the way that parts of the MIFARE hardware are also present on the JCOP die. There must be a special applet available to activate the MIFARE part on the JCOP card. This was released as MIFARE4Mobile version 1.0.1. But nowadays version 1.0.1 is obsolete and replaced with version 2.1.1.
The link from my previous post is a good advice, because here you get information about the suitable JCOP solution and you can get samples.
Regards,
The TapLinx team
+ 0
|
- 0