Reply To: Configuring PN512 correctly

Forum MIFARE and NFC Reader IC`s Configuring PN512 correctly Reply To: Configuring PN512 correctly

Re: Configuring PN512 correctly

23. January 2017 at 20:28
Hi all,

I need to use a Explore NFC borad with 16 bit Freescale controller to read a MIFARE ultralight EV1 card. I have configured SPI commmunicatioon using codewarrior IDE. I need to know how should I use the available Linux based library to read from the MIFARE card and give access control to another PCB controlled by the 16 bit freescale controller.

A step by step instructions will be of great help,, as i am new to these things.

Thanks in Advance
+ 0  |  - 0