Forum › MIFARE SDK › TapLinx › Reply To: TapLinx
Hi Sandor,
Then you should start with TapLinx. But take in mind, the SAM AV2 is not supported by default. You have to implement the SAM interface and this depends on the driver of the contact interface.
Regards,
The TapLinx Team
Then you should start with TapLinx. But take in mind, the SAM AV2 is not supported by default. You have to implement the SAM interface and this depends on the driver of the contact interface.
Regards,
The TapLinx Team
+ 0
|
- 0