Forum › MIFARE and NFC Reader IC`s › Configuring PN512 correctly › Reply To: Configuring PN512 correctly
Hi Benjamin,
The self-test is used in the factory as part of the test procedure. Please take in mind that the self-test result depends on the version. See chapter 20 Errata in the data sheet for the differences of self-test outputs.
Regards,
The MIFARE Team
The self-test is used in the factory as part of the test procedure. Please take in mind that the self-test result depends on the version. See chapter 20 Errata in the data sheet for the differences of self-test outputs.
Regards,
The MIFARE Team
+ 0
|
- 0