Forum › MIFARE general topics and applications › DESFire EV1 SelectApplication Command › Reply To: DESFire EV1 SelectApplication Command
Sorry, maybe I did not clearly describe the problem
I use "CreateApplication" command to create a Application, and "Key Settings 2" is set to "0x03".
then when I do Authentication operations, default I need use 0x0a or 0x1a to do Authentication operations for 3 keys.
My question is this Application have 3Keys, May I can change it into different ways to do Authentication operations? For example Key0 use "0x0a" and Key1 use "0x1a", Key2 use "0xaa".
reference document "ds134036_MF3ICD81 MIFARE DESFire EV1_3.6.pdf" P47
I use "CreateApplication" command to create a Application, and "Key Settings 2" is set to "0x03".
then when I do Authentication operations, default I need use 0x0a or 0x1a to do Authentication operations for 3 keys.
My question is this Application have 3Keys, May I can change it into different ways to do Authentication operations? For example Key0 use "0x0a" and Key1 use "0x1a", Key2 use "0xaa".
reference document "ds134036_MF3ICD81 MIFARE DESFire EV1_3.6.pdf" P47
+ 0
|
- 0