Forum › MIFARE general topics and applications › Exampel code for communicating with DESFire under PC/SC with the PR533 › Reply To: Exampel code for communicating with DESFire under PC/SC with the PR533
Hi,
And thank you for Your quick response.
This is not quite what we were looking for.
We try and rephrase:
References:
UM10463 PR533 Contactless Interface Controller, Rev. 1.2 - 10 November 2014, 230112 User Manual.
Problem:
We are trying to do the example descriped in the UM10463 document (rev 1.2) on page 55. The example is for an Ultralight card,
but what we need to do is to send commands to a Mifare Desfire 4k card and read the result.
We have changed the Switch Protocol command to 14443-4A.
Send seems to be O.K., but we get the TAG error on receive.
The error status is 6F 01 (PSCS part 3 Supplement Table3). Cannot find it there.
What does it mean?
Rgds
Lars
And thank you for Your quick response.
This is not quite what we were looking for.
We try and rephrase:
References:
UM10463 PR533 Contactless Interface Controller, Rev. 1.2 - 10 November 2014, 230112 User Manual.
Problem:
We are trying to do the example descriped in the UM10463 document (rev 1.2) on page 55. The example is for an Ultralight card,
but what we need to do is to send commands to a Mifare Desfire 4k card and read the result.
We have changed the Switch Protocol command to 14443-4A.
Send seems to be O.K., but we get the TAG error on receive.
The error status is 6F 01 (PSCS part 3 Supplement Table3). Cannot find it there.
What does it mean?
Rgds
Lars
+ 0
|
- 0