Forum › MIFARE general topics and applications › Ultralight EV1 specific command APDU › Reply To: Ultralight EV1 specific command APDU
I know the extra commands (and as I mentioned I used the APDU passthrough of the ACR122 with PN532 commands to get it working for ACR122).
I managed to get things working on the PN547 by starting a transparent session, sending envelope APDU and ending the transparent session. But this is not optimal as the read is shared and the multi statement and transparent mode are conflicting with the OS (WM10).
I managed to get things working on the PN547 by starting a transparent session, sending envelope APDU and ending the transparent session. But this is not optimal as the read is shared and the multi statement and transparent mode are conflicting with the OS (WM10).
+ 0
|
- 0