Mifare Classic 1K – Access Bits

Forum / MIFARE general topics and applications / Mifare Classic 1K – Access Bits

  • 4. November 2019 at 14:08
    Hello everyone

    i want to know can i change access bits in mifare classic 1k in sector 0. my access bits are FF0F0011. in other sectors FF078069.

    i tried to change but it was unsuccessful. please help me
    + 0  |  - 0

    Re: Mifare Classic 1K – Access Bits

    5. November 2019 at 9:21
    Hi Misha,

    The block 0 in sector 0 is the only block you cannot write. It contains the UID and other manufacturer information. But the other two data blocks in sector 0 can be written, and you can change the access bits for this blocks.

    The TapLinx team

    + 0  |  - 0

    Re: Mifare Classic 1K – Access Bits

    7. November 2019 at 10:27
    Hi TapLinx Support,

    thanks for replay.

    whitch soft is the best to change access bits?
    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.