Asking a DLL for NXP CLRD710

Forum / MIFARE general topics and applications / Asking a DLL for NXP CLRD710

  • 4. March 2015 at 4:20
    hello guys

    i would like to ask if you have a working DLL that could be able to add to my new application created on C sharp i am using Visual Studio Net 2012, i have here some source code from Ansi C but no luck on its function imported to VS2012 its give me an error that memory is corrupt..its been more than two weeks i cannot figure it out...i'm trying to OFF the led of the NXP CLRD710 but no luck in C# code..may i ask you have a working codes created from C#..

    thank
    + 0  |  - 0

    Re: Asking a DLL for NXP CLRD710

    13. March 2015 at 6:51
    Any answer for this? I also needed same for working with ultralight C tag in my dotnet application. Neobagsjol please let me know if you have find any solution
    + 0  |  - 0

    Re: Asking a DLL for NXP CLRD710

    17. March 2015 at 11:34
    Hi neobagsjol and kamii47,

    currently the MIFARE SDK is available only for Android but a release for Windows .NET is being planned. You can use the NXPRdLib for communicating with the “Contactless Reader RD710” also known as Pegoda Reader. The NXPRdLib is written in C but you can used as “unmanaged library” in your Visual Studio project.

    These links may useful:

    http://www.nxp.com/documents/application_note/AN10993.pdf
    http://www.nxp.com/documents/application_note/AN10992.pdf
    http://www.nxp.com/documents/application_note/AN10990.pdf

    Regards,
    The MIFARE Team
    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.